 | Line activity LEDs
 | Printer output: sequential call#, date, time, digits dialed,
tone/pulse dialing, call connect, disconnect and duration of call, number of rings, audio
time and control condition, power on and down time, target case number and type of call. |
| 16 Button control keypad- Used to control unit operation &
enter parameter setup program |
| Liquid crystal display- Indicates current status of lines or
detailed information of a line. Also functions as a setup menu when altering the unit
parameters. |
| Number of Lines
|
|
| One standard-expandable to six |
| Memory Capacity |
| 1000 calls waited to be printed (optional) |
| Digit Capacity- sixty (60)
Data Output-RS232 with multiple baud rates (optional) |
| Telephone Line Loading
Bridging & Isolated from Ground-DC- 10 M ohm AC-200 K ohm (Idle line
voltage 10 Vdc) |
| Decoder for Slave -852 Hz and 1633 Hz "C" tone |
| Rotary Dial |
| Dial pulse rate- 8 PPS to 22 PPS |
| Inter Digit time- 300 mS |
| Make/break ratio-50% to 80% |
| Touch Tone |
| Minimum duration-40 mS |
| Minimum inter digit time- 30 mS |
| Sensitivity- 25 dBm to -3 dBm |
| Ring Detector |
| Detects metallic ringing voltage (90 Vrms) |
| Line Activity- non blocking |
| Cassette Recorder Output |
| Separate audio output and relay contacts per line |
| Audio Output |
| Two line level outputs featuring Password protected audio with minimization per line |
| Distortion- -<5% over 300 to 4000 Hz |
| Alarms- Hold and decode
at least 8 alarm numbers |
| Call counter-9999 Calls |
| Mean time Between Failure- Greater
than 10,000 hours |
| Power Requirement- Standard
115 Vac +_10% 50/60 Hz, 70 watts |
| Size- 17.25"wide X
5.25" high X 12.75" deep |
| Weight- 25 lbs Max. |
