MODEL 1200ES - Specifications
  • Front Panel Features
    • Monitor speaker and volume control
    • 1/8" microphone and phono jacks
    • Activity status indicator
  • Back Panel Features
    • Audio output phono jack
    • Audio input phono jack (play through to output jack when unit is idle)
    • 6 position modular connector:
      • Relay contacts - closed when message plays
      • Start terminal - short terminals to play message
    • Power jack: 11-25 volts VOLTS DC or AC 300 MA
    • 120VAC Wall plug transformer included.
  • Frequency Response and Sampling Rate
    • 40-3500 hz +/- 3db @64 Kbps on 1 to 6 minutes models.  Lower on other models. 
  • Recording Time
    • Message is recorded in EPROM memory
    • 1   minute
    • 2   minutes
    • 3   minutes
    • 4   minutes
    • 5   minutes
    • 6   minutes
    • 9   minutes
    • 12 minutes
  • Message Repeat Time
    • Continuously or selectable delays of 1, 3 or 5 minutes (Others delays available) 
    • Start message from contact closure or with optional motion sensor
  • Inputs
    • Phono jack, 600 ohms unbalanced 85mv.
    • Microphone, 1/8" jack, 600 ohms (low Z) 1.4mv.
    • Remote record (record new message over a telephone)
  • Outputs
    • Phono jack, 600 ohms unbalanced adjustable up to 0.4 volts
    • Speaker level phono jack, 8 ohms .5 Watts
    • 5 Watt amplifier available as an option
  • Options
    • 3 messages or Message-on-Hold
    • 6 messages 
    • Remote record (change messages over the telephone)
    • 19" rackmount
    • Wall mount
    • Microphone and tape recorder patch cable
    • Custom-made units available
  • Additional Information
    • Temperature range: -20 to +80 degrees C. 95% RH
    • Size : 8.5" w x 1.75" h x 5.5" d Weight : MAX 3 LBS.
    • Color: Grey